The CAMDA KDGH400-NG 400 kW Gas Generator Set is a high-capacity natural gas power generation system designed for reliable three-phase electricity generation and improved emissions control.
With a rated output of 400 kW / 500 kVA, the generator provides 380/220 V, 50 Hz, three-phase, four-wire power. It is powered by the HGKT38 gas engine, paired with an LSA47.2M7 alternator and Deep Sea DSE6120 control system.
For applications requiring strict emissions management, the generator can be equipped with Selective Catalytic Reduction (SCR) technology to reduce nitrogen oxide (NOx) emissions.
| Specification | Details |
|---|---|
| Model | KDGH400-NG |
| Rated Power | 400 kW / 500 kVA |
| Voltage | 380/220 V |
| Frequency | 50 Hz |
| Phase | 3 Phase, 4 Wire |
| Engine Model | HGKT38 |
| Alternator Model | LSA47.2M7 / 400 kW |
| Controller | Deep Sea DSE6120 |
| Engine Speed | 1,500 RPM |
| Circuit Breaker | 3-Pole MCCB |
| Fuel | Natural Gas |
| Fuel Consumption at 100% Load | 115 Nm³/h |
| Soundproof Noise Level at 7 m | 75 dBA |
| Specification | Open Type | Soundproof Set |
|---|---|---|
| Length | 4,200 mm | 6,058 mm |
| Width | 2,010 mm | 2,438 mm |
| Height | 2,480 mm | 2,591 mm |
| Weight | 6,080 kg | 8,700 kg |
The CAMDA 400 kW gas generator can be configured with a Selective Catalytic Reduction (SCR) system for NOx emission control.
SCR technology is designed to reduce nitrogen oxide emissions from engine exhaust gases. According to the supplied specifications, the system was developed to meet the emission requirements referenced by the Beijing DB11/1056-2013 fixed internal combustion engine air-pollutant discharge standard, including the stated target values of:
NOx emissions: ≤ 75 mg/m³
Ammonia slip: ≤ 2.5 mg/m³
Actual emissions performance depends on fuel composition, engine operating conditions, exhaust-treatment configuration, installation, and applicable local regulations.
Read moreThe CAMDA KDGH400-NG 400 kW Gas Generator Set is a high-capacity natural gas power generation system designed for reliable three-phase electricity generation and improved emissions control.
With a rated output of 400 kW / 500 kVA, the generator provides 380/220 V, 50 Hz, three-phase, four-wire power. It is powered by the HGKT38 gas engine, paired with an LSA47.2M7 alternator and Deep Sea DSE6120 control system.
For applications requiring strict emissions management, the generator can be equipped with Selective Catalytic Reduction (SCR) technology to reduce nitrogen oxide (NOx) emissions.
| Specification | Details |
|---|---|
| Model | KDGH400-NG |
| Rated Power | 400 kW / 500 kVA |
| Voltage | 380/220 V |
| Frequency | 50 Hz |
| Phase | 3 Phase, 4 Wire |
| Engine Model | HGKT38 |
| Alternator Model | LSA47.2M7 / 400 kW |
| Controller | Deep Sea DSE6120 |
| Engine Speed | 1,500 RPM |
| Circuit Breaker | 3-Pole MCCB |
| Fuel | Natural Gas |
| Fuel Consumption at 100% Load | 115 Nm³/h |
| Soundproof Noise Level at 7 m | 75 dBA |
| Specification | Open Type | Soundproof Set |
|---|---|---|
| Length | 4,200 mm | 6,058 mm |
| Width | 2,010 mm | 2,438 mm |
| Height | 2,480 mm | 2,591 mm |
| Weight | 6,080 kg | 8,700 kg |
The CAMDA 400 kW gas generator can be configured with a Selective Catalytic Reduction (SCR) system for NOx emission control.
SCR technology is designed to reduce nitrogen oxide emissions from engine exhaust gases. According to the supplied specifications, the system was developed to meet the emission requirements referenced by the Beijing DB11/1056-2013 fixed internal combustion engine air-pollutant discharge standard, including the stated target values of:
NOx emissions: ≤ 75 mg/m³
Ammonia slip: ≤ 2.5 mg/m³
Actual emissions performance depends on fuel composition, engine operating conditions, exhaust-treatment configuration, installation, and applicable local regulations.